Home
|
Contact Us
|
Log In
|
Shopping Cart - 0 item(s) - AUD $0.00
|
Checkout
Search
Advanced Search
Categories
DIYGP PCBs & Kits
(22)
DBE PCB's (25)
Enclosures (21)
Germanium Transistor Sets (16)
Diodes (21)
ICs (41)
Transistors (21)
Resistors (90)
Capacitors-> (46)
Potentiometers-> (51)
Trimpot-> (18)
Switches (14)
LED (34)
Accessories (25)
Audio & Power (14)
Knobs (37)
Wire (1)
Vactrol / Optocoupler (1)
Pedal Decals (5)
Specials ...
All Products ...
Home
::
DIYGP PCBs & Kits
:: Ember Drive - Overdrive
DIYGP PCBs & Kits
Product 13/22
larger image
Ember Drive - Overdrive
AUD $8.00
Please Choose:
PCB Components
Components + White LED ( +AUD $7.00 )
Components + Blue LED ( +AUD $7.00 )
Components + Red LED ( +AUD $7.00 )
Components + Green LED ( +AUD $7.00 )
Components + Amber LED ( +AUD $7.00 )
None
Kit Options
Add 9mm Potentiometers ( +AUD $7.20 )
Mono Jacks ( +AUD $7.20 )
Add Miniature DC Jack ( +AUD $3.80 )
Knobs
(None)
White (2) ( +AUD $2.40 )
Black (2) ( +AUD $2.80 )
Add to Cart:
15 Units in Stock
Difficulty:
Beginner
All Kits are Assembled in Australia
Not sure what parts to order? Learn more in
this short video
Ember Drive - Overdrive
A simple low part, compact overdrive. Use a low gain transistor for an overdriven sound, or put in an high gain Darlington transistor like the mpsa13 for a thicker, fuzzier sounding effect!
Dimensions: 22mm x 15mm
PCB Sizing: 1590a enclosure (no-special hardware required) or larger
*** Base price is for PCB only, please select kit options above to order kit components
Kit Options
Please select the kit options you would like included with your PCB from the checkboxes above
• PCB Components
"PCB Components" includes all onboard components you need to build the "Ember Drive". Battery snap is included as well as 6 lengths of wire. Also includes, LED, current limiting resistor ("medium" brightness) and plastic bezel for mounting the led to an enclosure.
• 9mm Potentiometer
Add 9mm Alpha metal shaft potentiometers to your kit!
*** A 100ka pot will be supplied with your Ember Drive as 250a 9mm pots are not very common.
• Mono Jacks (2 of)
!! Due to stock scarcity Nuetrik mono jacks may be sent in place of lumberg mono jacks !!
"Compact Mono Jacks (2of)" include 2 Lumberg compact mono jacks with your kit. These jacks are small in size, a good choice for tight builds and beginners but can be used for any build. Please note you will need a stereo jack if you plan to power your effect with a battery. (Stereo jacks are available in the hardware section of this store).
• Miniature DC Jack
These DC jacks are very small and are suitable for any build not using a battery / battery switching. Especially good for 1590a builds as they are very compact.
• Knobs
Davies 1900H Clone Knob
What else do i need to complete this project?
You will need an enclosure and a 3pdt footswitch to complete this project, if you order all available kit component options above.
Downloads
Bill of Materials & Build Guide
Schematic
Ember Drive Videos
Sound Demo / Build Report for the EmberDrive
Ember Drive - Transistor Comparison
Customers who bought this product also purchased...
Davies 1900h Style Knob - White
Chicken Head Knob - White
1uf Polyster Film Capacitor - EPCOS
1n4148 Small Signal Diode - (1n914 equiv)
32pin SIL Socket
5mm Green Diffused Led